Instant Electric Water Heater Tap, Bottom Connection, White

Description

Description Instant Electric Water Heater Tap White, Bottom Connection. ATTENTION !!! This instant water heater model is designed for BOTTOM connection (pipe from below). If the water heater is connected in violation of this rule, it constitutes a violation of the operating rules, which will immediately lead to the heater failing. Violation of the operating rules is not a warranty case and is not subject to repair or replacement. Advantages of the 3 kW instant water heater: low power consumption (3 kW power); fast water heating in 3-5 seconds (no need to wait for the water to heat like with a boiler); heats water up to 60 degrees; minimizes water usage; low cost of the water heater (for comparison, a 6 kW heater or even the simplest boiler cost 7 times more or more); simple installation — just install the tap and plug it into an outlet; saves space — the tap is installed instead of a stationary tap, requiring much less space than a boiler. Now let's address some very IMPORTANT points and answer the main question of why the "tap doesn't work or works incorrectly": the required water pressure for the heater to work is 0.04-0.5 MPa. If the water pressure is lower, the tap simply won't turn on, since it has a safety fuse that prevents it from burning out when there's no water or low pressure; if the pressure is higher than 0.5 MPa, the water temperature will be lower than the manufacturer-stated 60 degrees; for the heater to deliver 3 kW, the mains voltage must be 220 V. Often in houses (especially private or older ones) the voltage is below 220V, so the water heating temperature will be lower; a similar situation occurs in winter, when pipes freeze and water is very cold — a 3 kW water heater won't heat the water to 60 degrees, since 3 kW isn't a large power output.

Specifications

heater power — 3 kW

water heating — up to 60 degrees

water pressure — 0.04-0.5 MPa

voltage — 220 V

cable length — 0.9 m.