Power inverter LCD Z1A 12V to 220V 2600W pure sine wave

Description

LCD Z1A voltage converter, 12V to 220V, 2600W, pure sine wave. The device is designed to convert electricity from 12V to 220V. It allows loads of up to 2600W to be connected. This device can power devices such as: gas boilers, laptops, TVs, audio/video equipment, lighting fixtures, fans, cash registers. When choosing a voltage inverter, pay attention to the power rating of the device you intend to use, since the inverter is designed for a certain load, and if the power is insufficient it simply won't work or won't start. The connection sequence must be followed: first connect the inverter to the cigarette lighter socket or the battery terminals (depending on the kit), then plug the consumer device into the inverter's socket (while switched off), and only then turn on the inverter, followed by the consumer device itself. Car power inverter. DC-to-AC converter. It's an excellent fit for cases where you need to provide sustained power to various devices with a rated power of up to 1300W. It connects to a car's onboard network or directly to the battery, and is made of an aluminium alloy with enhanced thermal conductivity to dissipate heat via convection.

Specifications

Maximum power

2600 W

Rated power

1300 W

Output voltage – 220±5% Volts (true sine wave), frequency 50 Hz

External battery voltage – 12 volts (not included)

Microprocessor control, efficiency – 85-90%

LED operating-mode indicator

Voltmeter

Forced-cooling fan

Low-battery warning – 10.4-11.0 Volts (audible alarm)

Battery over-discharge protection – 9.7-10.3 Volts (shutdown)

Short-circuit protection

Load connection – one socket