Frame Kids' Pool Intex 57173 Size 122x122x30 cm

Description

Description. Frame Kids' Pool Intex 57173 Size 122x122x30 cm. Assembled square frame pool. This frame pool has the same quality as other large and expensive pools. That is, regardless of the pool size, the quality will always be at the highest level. Installing the pool is not difficult, but still requires attention. First, you need to prepare the site: 1) level it as much as possible; 2) cover the leveled area with sand or buy a special pool ground cloth. After preparing the site, you begin assembling the frame pool. The installation process includes the following stages: 1) carefully remove the pool from the box, place it on the prepared spot; 2) begin assembling the pool frame itself using the instructions; 3) after assembling the pool, begin filling it with water. Meanwhile, walk around the perimeter of the pool, making sure there are no folds on the bottom. If done correctly, the frame pool will serve you for a long time, about 5 years. Pool storage should also be handled correctly. After disassembling the pool, dry it and store it in a heated room. By the way, draining water from the pool is very simple because there is a drain valve at the bottom. You can even connect a garden hose to the valve and water the garden so the water is not wasted. Frame pool specifications: Basin material: three-layer PVC: PVC + fiberglass mesh + PVC. Material thickness: walls - 0.52 mm; bottom - 0.25 mm; Exterior finish: blue. Interior finish: blue. Frame material: Corrosion-resistant metal frame (galvanized powder-coated steel tubes). Assembly system: easy pin-lock system. Assembly time: Installation usually takes about 30 minutes with 2-3 people, excluding earthworks and filling. Dimensions: Length: 122 cm. Width: 122 cm. Height: 30 cm. Water capacity, 90% volume: 337 L. Volume: 337 L. Number of legs: 4 pcs